20
Technical Data
Appliance Class 2 sub class 1 and Class 1
APPLIANCE CATEGORY:
II2H3+
APPLIANCE GAS SUPPLY: LPG G30 28-30/37 mbar
Dimensions
Height
900 mm
Depth
600 mm
Width
600 mm
Oven Capacity
53 litres
Hob
Front left burner (rapid) 3,0 kW (G20) - 2,8 kW (G30)
Rear left burner (semi-rapid)
2,0 kW
Front right burner (auxiliary)
1,0 kW
Rear right cast iron hotplate, Ø 180 mm
1,5 kW
Instructions for the Installer
Oven
Top heating element
800 W
Bottom heating element
1,000 W
Oven elements
1,800 W
Grill Element
1,650 W
Convection element
2,000 W
Convection fan
25 W
Oven light
25 W
Total rating
2,050 W
Total appliance electric rating (hob + oven) 3,550
W
Supply voltage (50 Hz)
230 V
Installation
This appliance cannot be positioned on a
base.
The following instructions are meant for a qualified
installer, in order that the operations of installation,
regulation, and service are executed according to the
existing regulations.
Whenever changes are mode involving the disconnection
of the appliance it is necessary to proceed with
maximum caution.
THE MANUFACTURING COMPANY DECLINES
ANY RESPONSABILITY FOR POSSIBLE
DAMAGES RESULTING FROM AN
INSTALLATION WHICH DOES NOT COMPLY
WITH THE RULES IN FORCE.
Installation environnement
Warning
- This unit can be installed and can work only
in constantly ventilated rooms, according to rules in
force.
In order to make the gas unit work properly, it is
necessary that air sufficient to gas combustion can
naturally flow in the room. (The installer must follow the
rules in force).
The air flow into the room must come directly through
openings of external walls. These openings (or opening)
should be realized in such a way not to be occluded both
from inside and outside.
Installation and maintenance must be carried out by a
qualified technician, in compliance with rules in force.
The electric coonection must be carried out in
compliance rules in force.
Our responsability will not be involved in case of
accidents caused by a defective or non existent
earth connection.
Combustion products discharge
Gas cooking units must discharge combustion products
through hoods directly connected to flues or outside.
Positioning
This appliance has been designed to be placed close to
furniture units not exceeding the height of the working
level.
Levelling
The appliance is provided with adjustable small feet
placed in the back and front corners od the base.
By adjusting the small feet (see figure) it is possible to
change the height of the appliance so as to ensure a
better levelling with other surfaces and a uniform
distribution of the liquids contained in pans or pots.
