Electrolux EKM 60350, Инструкция пользователя, Страница: 36 / 88

36 electrolux
2. Adjustment of minimum level
To adjust the minimum level of the
burners, proceed as follows:
1.
light the burner;
2. turn the knob on the position of mini-
mum flame;
3. remove the knob;
4. with a thin screwdriver, adjust the
by-pass screw (see diagram).
• •• ••
If changing from natural gas 20
mbar/13 mbar to liquid gas ,
completely tighten the adjustment
screw in, until a small regular flame
is obtained.
• ••
••
If changing from liquid gas to
natural gas 20 mbar , undo the by-
pass screw about 1/4 of a turn, un-
til a small regular flame is obtained.
• •• ••
If changing from natural gas 20
mbar to natural gas 13 mbar
undo the by-pass screw about 1/4
of a turn, until a small regular flame
is obtained.
• ••
••
If changing from liquid gas to na-
tural gas 13 mbar , undo the by-
pass screw about 3/4 of a turn, un-
til a small regular flame is obtained.
Reassemble the parts following the
same procedure backwards.
Finally, check the flame does not go
out when quickly turning the knob from
the maximum position to the minimum
position.
by-pass screw