Electrolux EKK 60331, Инструкция пользователя

Страница: 31 / 38

electrolux 31
Gas connection must be carried out
according to the rules in force. The
manufacturing company release the
unit, once tested, adjusted for the kind
of gas stated on the rating plate located
on the back of the range, next to con-
nection pipe. Be sure that you are going
to connect the unit to the same kind of
gas written on the plate.
Gas connection (Fig. 14)
LPG : use the pipe holder «A».
Natural gas : use the pipe holder «B».
Always insert the gasket «C». Then
proceed with the gas connection, as in-
dicated in the relevant paragraphs.
Connection using a rigid pipe
or a flexible metal pipe
To ensure higher safety, it is recom-
mended to carry out the connection to
the gas system using rigid pipes (ex.
copper) or using flexible stainless steel
pipes, to avoid any stress to the unit.
Gas feeding pipe fitting is Gc 1/2. For
this type of installation, connection to the
gas supply should be carried out using
only and exclusively flexible metallic
tubes in conformity with rules in force.
Connection using flexible non
metal pipes
When the connection can be easily
inspected in its full extent, there is the
chance to use a flexible pipe according
to the rules in force. The flexible pipe
must be tightly fixed using clamps ac-
cording to the rules in force.
Gas connection
Fig. 14