Electrolux EKG6121AOK, Руководство пользователя

Страница: 21 / 32

Removing the shelf supports
1. Pull the front of the shelf support
away from the side wall.
2
1
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
Valid with telescopic runners:
The retaining pins on the tele-
scopic shelf runners must point to
the front!
CAUTION!
Make sure that the longer fixing
wire is in the front. The ends of
the two wires must point to the
rear. Incorrect installation can
cause damage to the enamel.
11.2 Catalytic walls
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects
on walls while the oven operates.
To support this self-cleaning process
heat the oven without any food
regularly:
1. Open the oven door.
2. Remove all accessories from the
oven.
3. Close the door.
4. Set the maximum oven temperature
and let the oven operate for 1 hour.
5.
Clean the oven cavity with a soft and
damp sponge.
CAUTION!
Do not attempt to clean catalytic
surfaces with oven sprays, abra-
sive cleaners, soap or other clean-
ing agents. This may damage the
catalytic surface.
Discolouration of the catalytic sur-
face has no effect on catalytic
properties.
11.3 Cleaning the top oven
glass panels
The door glass on your product
can be different in type and shape
from what you see in diagrams.
The number of glasses can be dif-
ferent.
ENGLISH 21