Electrolux EIV65346X, Руководство пользователя

Страница: 21 / 48

Problem Possible cause Remedy
Residual heat indicator
does not come on.
The zone is not hot be‐
cause it operated only for a
short time or the sensor is
damaged.
If the zone operated suffi‐
ciently long to be hot,
speak to an Authorised
Service Centre.
Hob²Hood does not work. You covered the control
panel.
Remove the object from
the control panel.
Automatic Heat Up does
not operate.
The zone is hot. Let the zone become suffi‐
ciently cool.
The highest heat setting is
set.
The highest heat setting
has the same power as the
function.
The heat setting changes
between two levels.
Power management oper‐
ates.
Refer to "Daily use".
The sensor fields become
hot.
The cookware is too large
or you put it too near to the
controls.
Put large cookware on the
rear zones if possible.
There is no sound when
you touch the panel sensor
fields.
The sounds are deactiva‐
ted.
Activate the sounds. Refer
to "Daily use".
The flexible induction
cooking area does not heat
up the cookware.
The cookware is in a
wrong position on the flexi‐
ble induction cooking area.
Place the cookware in the
correct position on the flex‐
ible induction cooking
area. The position of the
cookware depends on the
activated function or func‐
tion mode. Refer to "Flexi‐
ble induction cooking
area".
The diameter of the bottom
of the cookware is incor‐
rect for the activated func‐
tion or function mode.
Use cookware with a diam‐
eter applicable to the acti‐
vated function or function
mode. Use cookware with
a diameter smaller than
160 mm on a single sec‐
tion of the flexible induction
cooking area. Refer to
"Flexible induction cooking
area".
comes on.
Child Safety Device or
Lock operates.
Refer to "Daily use".
comes on.
There is no cookware on
the zone.
Put cookware on the zone.
The cookware is unsuita‐
ble.
Use suitable cookware.
Refer to "Hints and tips".
ENGLISH 21