![Electrolux EIKM6047 Скачать руководство пользователя страница 38](http://html.mh-extra.com/html/electrolux/eikm6047/eikm6047_user-manual_96217038.webp)
38
electrolux
connecting to the gas supply
Connecting to the gas supply
This appliance is designed to be installed
with an appliance flexible connection only.
Supply piping should not be less than
R3/8. Connection is made to the Rc ½
(½” B.S.P.) female threaded entry pipe
located just below the hob level on the
rear left hand side of the appliance.
NOTE: ONLY LIQUID SEALANTS TO
BE USED WHEN INLET GAS PIPE IS
FITTED I.E.: DO NOT USE P.T.F.E.
SEALANT TAPE
. Carry out a gas
tightness test after connecting to the gas
supply. The gas bayonet connector must
be fitted in the shaded area indicated.
Take into account that it must be
possible to pull the appliance forward
sufficiently. Ensure the hose does not
become trapped when pushing the
appliance into position.
IMPORTANT: FLEXIBLE TUBING
USED MUST COMPLY WITH BS.669
CURRENT EDITION.
LPG Flexible connections must be a type
suitable for L.P.G and capable of
operation up to 50 mbar and carry a red
stripe, band or label.
Fitting the stability chain
It is recommended that if the appliance is
to be installed with a flexible supply pipe,
a stability chain be fitted and is available
from your supplier (see Important Safety
Requirements). These instructions
should be read in conjunction with any
leaflet packed with the stability chain.
1. Place the appliance in its intended
position and level appliance.
2. Mark a position 100mm from the top
of the rear right hand corner.
3. Measure down 150mm from this
point. This gives the position of the
wall anchor point for the stability
chain.
4. The stability chain anchor point on
the appliance is shown below.
Содержание EIKM6047
Страница 1: ...user manual Cooker EKC6046 EKC6047 EIKM6047 Oven ...
Страница 2: ...We were thinking of you when we made this product ...
Страница 43: ......
Страница 44: ...123 465 789 00 26042006 www electrolux com www electrolux co uk 349148000 08 2006 ...