Electrolux EI30MH55GBA, Техническое и сервисное руководство

Страница: 49 / 70

Component Teardown
4-9
Method for Removing Fan Blade
1. Hold the edge of the rotor of the fan motor by
using a pair of groove joint pliers.
2. Remove the fan blade from the shaft of the fan
motor by pulling and rotating the fan blade with
your hand.
3. Now, the fan blade will be free.
Method for Installing Fan Blade
1. Hold the center of the bracket which supports the
shaft of the fan motor on the flat table.
2. Install the fan blade to the shaft of fan motor by
pushing the fan blade with a small, light weight,
ball peen hammer or rubber mallet.
CAUTION
Make sure that any pieces do not enter the gap
between the rotor and the stator of the fan motor
because the rotor is easily shaven by pliers and
metal pieces may be produced.
* Do not touch the pliers to the coil of the fan
motor because the coil may be cut or
damaged.
* Do not disfigure the bracket by touching
with the pliers.
CAUTION
* Do not hit the fan blade with excessive force
when installing because the bracket may be
disfigured.
* Make sure that the fan blade rotates smooth
after installation.
* Make sure that the axis of the shaft is not
slanted.
CAUTION
Do not reuse the removed fan blade because the
hole (for shaft) may be larger than normal.
Gap
Rotor
Bracket
Stator
Groove joint pliers
Coil
Shaft
Axis
Stator
Rotor
These are the positions
that should be pinched
with pliers.
Shaft
Table Center of
bracket