Electrolux EI30BM55HB - 30" Microwave Oven, Техническое и сервисное руководство

Страница: 43 / 60

Component Teardown
4-5
WARNING
TO PREVENT AN ELECTRIC SHOCK, TAKE THE FOLLOWING PRECAUTIONS.
1. BEFORE WIRING,
1) DISCONNECT THE POWER SUPPLY CORD.
2) OPEN THE DOOR BLOCK IT OPEN.
3) TO DISCHARGE THE HIGH VOLTAGE CAPACITOR, WAIT FOR 60 SECONDS.
2. DON’T LET THE WIRE LEADS TOUCH TO THE FOLLOWING PARTS;
1) HIGH VOLTAGE PARTS:
MAGNETRON, HIGH VOLTAGE TRANSFORMER, HIGH VOLTAGE, CAPACITOR AND HIGH
VOLTAGE RECTIFIER ASSEMBLY.
2) HOT PARTS:
OVEN LAMP, HOOD LAMPS, MAGNETRON, POWER TRANSFORMER AND OVEN CAVITY.
3) SHARP EDGE: ALL PARTS
(BOTTOM PLATE, OVEN CAVITY, WAVEGUIDE FLANGE, CHASSIS SUPPORT AND OTHER
METALLIC PLATE.)
4) MOVABLE PARTS (TO PREVENT A FAULT)
FAN BLADE, FAN MOTOR, SWITCH, SWITCH LEVER, OPEN BUTTON.
3. DO NOT CATCH THE WIRE LEADS IN THE OUTER CASE CABINET.
4. INSERT THE POSITIVE LOCK CONNECTOR UNTIL ITS PIN IS LOCKED AND MAKE SURE THAT
THE WIRE LEADS DO NOT COME OFF EVEN IF THE WIRE LEADS ARE PULLED.
5. TO PREVENT AN ERROR FUNCTION, CONNECT THE WIRE LEADS CORRECTLY, REFERRING TO
THE PICTORIAL DIAGRAM.
Please refer to ‘OVEN PARTS, CABINET PARTS, CONTROL PANEL PARTS, DOOR PARTS’, when carry-
ing out any of the following removal procedures:
THE FOLLOWING ADJUSTMENTS OR COMPONENT REPLACEMENT CAN BE PERFORMED
WITHOUT REMOVING THE OVEN FROM THE WALL
1. Cook top lamps, sockets and grease filter.
2. Oven lamp, base cover and lamp glass assembly.
3. Turntable motor.
4. Hood louver.
5. Control panel assembly or components.
6. Stirrer cover and stirrer antenna.