8
Switching on the Dual-ring
Cooking Zone
1
The switch for the dual-ring cooking zone is
switched on by turning clockwise and must
not be turned past the stop!
1.
Turn the switch for the dual-ring cooking zone
clockwise. Turn past position 10 to the „dual-ring“
symbol until it stops.
2.
Then turn back to the required heat setting for
cooking.
3.
To stop cooking, turn back to the off position.
3
The next time the dual-ring cooking zone is re-
quired, repeat the above procedure.
Residual heat indicator
The ceramic cooking zone is equipped with a residu-
al heat indicator, a control lamp is allocated to each
cooking zone. This lights up as soon the correspond-
ing cooking zone is hot and warns against inadver-
tant contact.
The residual heat indicator only goes out when the
cooking zone has cooled down even when the cook-
ing zone is switched Off.
2
You can use the residual heat for melting and
keeping food warm.
1
Important!
As long as the residual heat indi-
cator is illuminated, there is a risk of burns.
1
Important!
If the power supply is interrupted
the residual heat indicator also go out and in-
formation about residual heat will no longer be
available. However, it is still possible to burn
yourself. This can be avoided by being partic-
ularly attentive.
Содержание EHP 6640 P
Страница 17: ...17 Assembly ...
Страница 18: ...18 ...
Страница 19: ...19 ...
Страница 20: ...20 ...