Electrolux EHO 600, Инструкция по эксплуатации и сборке

Страница: 9 / 10

31
PROBLEM DETECTION AND REPAIR DEVICE
Repairs on electrical appliances must be undertaken by
qualified electricians only. Improper repairs can cause
serious harm and danger for users. The appliance is
only disconnected from the mains when the fuse is
turned off or the mains connection is interrupted
You are able to clear the following defects:
• When the cooking zone does not heat up after you
switched it on?
=>Make sure that the fuse is turned on.
• You hear a buzzing when you heat up a zone?
=>This is no defect. It stops with increasing heat.
• Discolouring of a cooking zone?
=> This is not a change in the material but burnt and
not removed food remains. They do not affect
the function and the durability of the ceramic
hob.
Attention!
If any fissures or cracks appear on the hob's surface the
hob has to be switched off immeditately. Disconnect
the appliance from the mains and inform the service
department.
Important!
Following details are necessary for the service depart-
ment:
• type
................................................................................................
• model
................................................................................................
• product-no.
................................................................................................
You will find these details under "Technical data".
Hob dimensions length 572 mm
width 502 mm
height 49 mm
Cutout dimensions length 560 mm
width 490 mm
Voltage 230 V ~ 50 Hz
Total power 5.9 kW
Rating
plates
TECHNICAL DATA
Typ 015.0 EHO 600 Prod.No. 941 592 656
Instr. No. Ser.No. 5.9 kW
230 V ~ 50 Hz
SWISS MADE
Typ 015.0 EHO 600 K Prod.No. 941 592 657
Instr. No. Ser.No. 5.9 kW
230 V ~ 50 Hz
SWISS MADE