18 electrolux.com.au
CARE AND CLEANING
CAUTION!
Ensure the appliance is off and cool before
cleaning.
Enamel (on burner skirts and trivets)
Persistent stains may require rubbing with a nylon
scourer or creamed powder cleansers. Household
enamel cleaners are available, follow the manufacturer’s
instructions in their use. Harsh abrasive cleaners, powder
cleaners, steel wool or wax polishes should not be used.
Stainless steel (Models with Stainless Steel hob)
Simply wipe with a soft cloth using warm water and a mild
detergent and rinse with clean water. Where stainless steel
has become extremely dirty or discoloured, use a stainless
steel cleaner – but be sure to follow the brushing lines.
CAUTION!
Do not use abrasive cleaners or harsh solvents.
IMPORTANT
Scrapers are to be used on ceramic models only
Ceramic glass (on models with glass hob)
The specially treated glass in the product is manufactured
using the latest technology to the highest possible
standards for both safety and reliability. However, it must
be remembered that as it is CERAMIC GLASS, it may
break. Treat it accordingly. To clean the ceramic glass hob
use a soft cloth or sponge with detergent and warm water.
CAUTION!
If the surface is cracked, switch off the appliance
immediately to avoid the possibility of electric
shock. If the hob is very soiled:
1.
Remove soilage using the razor blade scraper.
2. Use a hob cleaner product after there has been
sufficient time allowed for the hob to cool. Shake the
bottle and apply a small quantity of cleaner directly
onto the hob. Rub clean using a damp cloth or paper
towels.
3. Use a damp cloth to remove all remaining traces of
the cleaner, which could otherwise burn on when the
hob is next used. Wipe the hob dry. CAUTION Use
the scraper supplied to remove spillages immediately,
while the hob is still hot! Especially sugar and foods
with a high sugar content (eg. jam), melted plastics
and foil, all of which can damage the hob if left. Razor
blade scraper Use the scraper to remove spillages
from the ceramic hob.
CAUTION!
Use the scraper supplied to remove spillages
immediately, while the hob is still hot! Especially
sugar and foods with a high sugar content (eg.
jam), melted plastics and foil, all of which can
damage the hob if left.
Razor blade scraper
Use the scraper to remove spillages from the ceramic hob.
How to use the razor blade scraper:
1.
Pull back the protective cover until the blade is visible.
2. Make sure that the razor blade is clean and not
worn. There is a risk, otherwise, that it might damage
the hob. New razor blades can be bought from
pharmacies.
3. Angle scraper at approx. 45° and scrape away the
spillage. The razor blade can be pressed down hard
onto the hob without causing any damage.
4. Carefully clean the blade by wiping it with a paper
towel.
5. When you have finished, press the protective cover
forwards as far as it will go. Keep the scraper out of
the reach of children.
Changing the razor blade:
1.
Open the scraper by completely unscrewing the
screw and then place the new razor blade at the
front edge.
2. Put the scraper together again and screw the screw
back into place.
3. Press the protective cover forwards as far as it will go
to cover the razor blade.
CAUTION!
THE RAZOR BLADE SCRAPER SHOULD BE KEPT
WELL OUT OF THE REACH OF CHILDREN.
Use the razor blade scraper carefully, as the razor
blade is extremely sharp.
Trivets and burners
These can all be lifted off and removed for separate
cleaning.
NOTE! When refitting the burners, ensure that they are
correctly seated.
Ensure burners are thoroughly dried after cleaning or
spillage. When cleaning the burners, ensure that all the
flame ports are free of any blockage (refer to Figure 1b
on page 4). If necessary, use a toothpick or brush to
clear ports. The outer surface of the burner caps have a
polished finish and extra care needs to be taken to avoid
Содержание EHH957BE
Страница 1: ...User manual Cooking EHH957BE ...
Страница 33: ...33 NOTES ...
Страница 34: ...34 electrolux com au NOTES ...