11
electrolux gas cooktops
LP Gas Conversion
Hex nut
assembly, fully
screwed down
Hex nut assembly,
removed
from regulator
and insert
disassembled
Insert
oriented
for LPG
operation
Figure 10
Insert
oriented for
natural gas
operation
• Check that the insert has been fitted correctly
as per diagram figure 10. Check that the hex nut is
fully screwed down.
• Check that the regulator has been fitted to the gas
supply line in the correct orientation, the arrow on the
base of the body indicates the direction of gas flow.
Once these checks have been completed, if the regulator still
fails to perform in a satisfactory manner it should be replaced.
9. One by one, turn the knobs to minimum and screw
in the bypass screw (accessible when the knob is
removed) until a small stable flame results. Turn the
knob to maximum and then back to minimum to ensure
that the correct minimum flame is maintained.
10. Attach the LPG sticker to the cooker, near the gas supply
inlet. Cover the Natural Gas label that is factory fitted.
