53/59
Manuale di Installazione ed Uso
Rev.: A
Instruction and Installation Manual
Electrical connection
This must be done only after completing all other installation operations.
—
Ensure that the socket used and
the entire circuit conform to current
regulations (including the earthing
circuit).
—
Connect the plug to the household
socket.
DANGER
It is strictly forbidden to remove
and/or replace either the plug or
electric cable. in case of damage,
call Service Force Centre for a
replacement.
DANGER
Do not use multiple adaptors or
extension cables.
Waste disposer embed diagram
The waste disposer is supplied with an “Installation Kit” comprising two brackets
and four screws.
Once the waste disposer has been placed under the sink and fully connected
up (as described above), it must be fixed to your kitchen cupboard using the kit
supplied. The diagram for doing this (it can be fixed on either side) is shown in
the plates below.
Screw both brackets onto the waste disposer, using two of the screws provided
and the ready-made holes on top of the waste disposer (depending on which
side you are fixing it). Then screw the brackets to your cupboard using the two
remaining screws.