Electrolux EFC 928, Руководство пользователя

Страница: 7 / 12

7
Mounting the cooker hood - Fig. 5
• Rest the template correctly against the wall. The lower
corner of the template corresponds to the lower corner of
the extractor hood. Fig. 3.
• A cross is marked on the template to indicate the centre.
Mark this point on the wall. Fig. 3.
• Drill two holes (Ø 8 mm) in the wall at the points
indicated, insert the stops (Ø 8 mm) and screw in the
hooks provided. Fig. 3.
• Hang the hood and adjust its position using the screws
on the hooks. Fig. 4.
• The reference point “a” marked on the body of the
extractor hood must coincide with the line you have
drawn on the wall. Fig. 4.
• Once the extractor hood has been correctly aligned,
remove the grease filter.
• From inside the hood, mark the final points at which the
hood has to be fixed to the wall. Fig. 5.
(to reach these points it will be necessary to remove
activated carbon filter frame until the filter itself is
replaced - see Fig. 2).
• Remove the hood.
• Drill 2 holes (Ø 8 mm) and insert the plugs (Ø 8 mm).
Fig. 5.
• Hang the extractor hood up again.
• Fix the hood into its final position using 2 screws (Ø
5x45 mm). Fig. 5.
Fig. 6
Fig. 7
Fig. 7