37
Charcoal filter
The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
To do this you will need an original
ELECTROLUX charcoal filter (available from
your local Service Force Centre).
This filter cannot be cleaned or reused.
As a general rule, the activated charcoal
filter should be changed once every four
months.
Fitting Fig. 4
Fit one charcoal filter on the left and one on the
right so to cover the plastic grids that protect the
fan wheel, check that the pins
R
on the
conveyor match with housing
S
on the charcoal
filter, then turn clockwise to fix it.
To remove
proceed in the reverse order.
Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the
registration plate located on the inside of the
unit.
The charcoal filter can be ordered from your
local ELECTROLUX Service Force Centre.
Changing the light bulb
Disconnect the unit from the mains power
supply.
Remove the grease filters.
Replace the old bulb with a new one of the
same type.
Refit the grease filter.
If the light does not come on, make sure the
bulb has been inserted in correctly before
contacting the technical assistance service.
Fig. 4
S
S
R
R
