Electrolux EDH3886GDE, Руководство пользователя, Страница: 30 / 76

At the beginning of drying
cycle (3-5 min.) there could
be a slightly higher sound
level. It is because of start of
the compressor that is
normal for compressor
powered appliances such:
refrigerators, freezers.
9. DAILY USE
9.1 Start a programme without
delay start
1. Prepare the laundry and load the
appliance.
CAUTION!
Make sure that when you
close the door, the
laundry does not catch
between the appliance
door and the rubber seal.
2. Press the on/off button to activate the
appliance.
3. Set the correct programme and
options for the type of load.
The display shows the programme
duration.
4. Press the Start/Pauze (Start/Pause)
touchpad.
The programme starts.
9.2 Starting the programme with
delay start
1.
Set the correct programme and
options for the type of load.
2. Press the delay start button again and
again until the display shows the delay
time you want to set.
You can delay the start of
a programme from a
minimum of 30 minutes
to a maximum of 20
hours.
3. Press the Start/Pauze (Start/Pause)
touchpad.
The display shows the countdown of the
delay start.
When the countdown is completed, the
programme starts.
9.3 Change a programme
1. Press the on/off button to deactivate
appliance
2. Press the on/off button to activate the
appliance.
3. Set the programme.
9.4 At the end of the programme
When the programme is completed:
• An intermittent acoustic signal
operates.
• The indicator flashes.
• The indicator
flashes.
• The Start/Pauze (Start/Pause) indicator
is on.
The appliance continues to operate with
the crease guard phase for approximately
other 30 minutes.
The crease guard phase removes creases
from your laundry.
You can remove the laundry before the
crease guard phase is completed. We
recommend, for better results, that you
remove the laundry when the phase is
almost completed or completed.
When the crease guard phase is
completed:
• The indicator is on but does not
flash.
• The indicator is on but does not
flash.
www.electrolux.com 30