
20
electrolux
care and cleaning
light
reminds you this operation.
Proceed as follows:
• Open the small door at the lower part of
the cabinet
• Turn the yellow stop upwards
• Pull out the reservoir
• Open the small cover and let water flow
down
• Close the small cover and re-insert cor-
rectly the reservoir
• Push it until it clicks and turn the yellow
stop downwards to lock firmly it
• Close the small door and press the
IIn
niic
ciio
o//P
Pa
au
us
sa
a
button again to allow the
programme to continue.
T
Th
he
e rre
es
se
errv
vo
oiirr m
mu
us
stt b
be
e rre
e--iin
ns
se
errtte
ed
d c
co
orrrre
ec
cttlly
y..
If this is not done the pilot light
comes
on during next drying and the programme
stops, leaving the laundry damp. The
E1157
buzzer will sound for 1 minute.
After emptying and inserting the reservoir
the
IIn
niic
ciio
o//P
Pa
au
us
sa
a
T-button has to be
depressed again to allow the programme to
continue.
Handy tip
: The condensed water may be
used in a steam iron or to top up a battery,
etc. In this case it must be filtered (e.g.
through a coffee filter).
Cleaning the air intake grille
Using a vacuum cleaner remove the fluff
from the air intake grille at the back of the
appliance.
Cleaning the drum
When your laundry does not reach the desired
degree of dryness, in other words, when it
turns out either too dry or too damp, we
advise you to clean the inside of the drum with
a cloth soaked with vinegar.
This will eliminate the slight patina that has
formed in the drum (due to residues of
detergent and softeners used in the wash-
ing, and to the lime contained in the water),
which prevents the probes from detecting
the correct degree of dryness.
Содержание EDC 66130W
Страница 1: ...EDC 77550W user manual notice d utilisation Tumble Dryer Séchoir à condensation ...
Страница 2: ......
Страница 60: ...136908541 00 20012010 www electrolux be ...