background image

g

8

Ironing Chart

Varied ironing speeds and fabric dampness can mean that the optimal setting can differ from 
that recommended in the table!

FABRIC

TEMPERATURE 
SETTING

IRONING RECOMMENDATION

Acrylic

Dry iron on wrong side.

Acetate

Dry iron on wrong side while still damp or use spray to 
dampen.

Nylon & 
Polyester

Iron on wrong side while still damp or use spray to 
dampen.

Rayon

Iron on wrong side of fabric.

Viscose

Mainly dry iron. Steam can be used under manufacturer’s 
instructions.

Silk

••

Iron on wrong side. Use an ironing cloth to prevent shine 
marks.

Cotton 
Blends

••

Check label and follow manufacturer’s instructions.
Use setting for the fibre requiring the lowest setting.

Wool & 
Wool Blends

••

Steam iron on wrong side or use an ironing cloth.

Cotton

••

Dry iron while still damp or use spray to dampen.
Use steam medium to high.

Corduroy

•••

Steam iron on wrong side or use an ironing cloth.

Linen

••• to "max"

Iron on wrong side or use an ironing cloth to prevent shine 
marks, especially with dark colours. 
Dry iron while still damp or use spray to dampen.
Use steam medium to high.

Denim

••• to "max"

Use maximum steam.

822 949 465_EDB7510U.book  Seite 8  Montag, 26. Januar 2009  9:45 21

Содержание EDB7510U













Отзывы: