- 13 -
Spares Operation 08.01 A. B.
599 51 19 69 EN
5.1.1 Setting the time of day
After connecting the power supply, 12:00 flashes in
the display.
Wait until the display indicates 12:05.
1.
Press key for a short time. The digits 12 00
light, : is flashing between the digits.
2.
Set the current time of day within 4 seconds
using the key or . Otherwise, please press
the key anew for a short time.
After 4 seconds the flashing signal goes out. Thus the
time of day is fixed.
In order to correct the time (e.g. summer/winter time),
press key and change the settings by key or . In
this case the signal sound is without meaning.
5.1.2 First cleaning
Remove all objects out of the oven as well as possibly
existing stickers and protective foils at the appliance.
Do not remove the nameplate! To remove possible
traces from production, clean the oven before the first
use. Wash and dry oven, control panel and oven door
with a cloth that is moistened with some washing-up
water. In doing so, the oven lighting can be switched
on.
Press key .
5.1.3 First heating
The oven must be heated once before the first use.
Please take care of a good room ventilation.
1.
Switch on the oven with key .
2.
Select the function hot air with key by tapping it
repeatedly.
3.
Set 230 °C with key .
Operate the closed oven at this temperature for
approximately 60 minutes.
4.
Switch off the oven with key .
5. Operation of setting and control units
5.1 Operation of the WOEC oven control
