Electrolux EBGL5X, Руководство пользователя

Страница: 21 / 24

INSTALLATION
Warning! Refer to "Safety information"
chapter.
Installing the oven
Warning! Installation into flammable
material must agree with NIN 2005,
chapter 4.2.2 of the VKF (Association
of Cantonal Fire Insurers) fire protection
guidelines and regulations.
1. Pull the appliance drawer out as far as it
goes, take hold of it and remove it.
A
A
A A
D
435
A
60
170
105
A 757 N 762
A 567 N 605
A 548
N 550
5 / 6 = 635 6 / 6 = 762
ca.50
2. Use the side handles to hold the oven
and slide it flush into the recess.
Caution! Make sure the cable is free
when you slide the appliance.
3. Use at least 2 screws to fix the oven on
both sides (Detail A).
A
Electrical connection
Let a qualified electrician connect appliance
to the electricity supply. Use a H05VV-F
type power cable or higher. Install the appli-
ance with a socket supply line, otherwise
the fixed home electrical system must in-
clude an isolating device with at least a 3mm-
contact separation to enable a simultane-
ous and all-pole cut off from the mains (ac-
cording to NIN 2000). The customer must
have a socket for the electrical connection
that is accessible and outside the coordina-
tion room. The length of the connection ca-
ble must be approximately 120 cm with
lines connected direct to the mains.
1. Open the terminal box (detail D).
2. Open the catch on the cord grip (detail E).
3. See the connection diagram for the ter-
minal connection.
4. Secure the cord grip by pressing firmly
on the catch (detail F).
5. Close the terminal box.
6. Fix the connection cable into the holes
provided to prevent it rubbing against
the drawer (detail G).
Installation diagram 400V
electrolux 21