Electrolux EBA60010X, Руководство пользователя

Страница: 32 / 44

• Fill up the water reservoir with 1.5 litres of water adding half a glass of vinegar or
• he same operations as preparing some cups of coffee (refer to the
• s (without
5. INSTALLATION
BUILDING-IN
citric acid.
Carry out t
previous Chapter “Coffee”), but without ground coffee or pods, so that only water
will flow out of the filter holder until the reservoir is completely empty.
Fill the reservoir again with cold water and repeat the above proces
using coffee as before) to rinse the boiler.
1
stalling the machine into kitchen furniture with proper characteristics will ensure a
ure a proper protection against any contact with
cover panel (for instance, when the
erators or freezers, because the
COMPONENTS FOR INSTALLING THE MACHINE
In
correct operation of the equipment.
Complying with the safety rules, ens
the electric components and with the parts protected only by functional insulation, by
housing the machine correctly into the furniture.
All components that guarantee protection, even a
machine is positioned at one of the ends of the modular furniture), should be firmly
fixed so that they cannot be removed without tools.
Install this machine at a certain distance from refrig
heat it sends out can impair their functioning.
This coffee machine and drawer canl be ins ht of 450 mm
. 1 fixing base
ing screws 3.9X19
of 1 mm
2 mm
talled into cabinets with heig
and width ranging from 560 mm to 570 mm. The machine is equipped with the
following components for the installation:
1
2.
13 self-thread
3. 4 screws M4X16
4. 1 cable clamp
5. 2 side slides
6. 2 side-plates
7. 2 side-plates of 2 mm
8. 2 drawer’s side-plate of
32