Electrolux DF80, Инструкция по эксплуатации

Страница: 7 / 56

7
function with a respective display light for 30 seconds
and then remain alternating in-between functions until
one of them is concluded.
(DFI80/DI80X)
When no function is selected, the indicator in models
DFI80 and DI80X shows room temperature and in
models DF80 and DF80X the indicator will show two
bars (- -) moving up and down.
Button TURBO FREEZING:
Allows for faster food cooling or freezing. This function’s
operation time can be set to 30 minutes (minimum) and
up to 2 hours and 30 minutes (maximum).
Other periods that may be selected: 45 minutes, 1 hour,
1 hour and 30 minutes and 2 hours.
In case you wish to deactivate this function, you must
press the button TURBO FREEZING again until the
indicator shows (- -) in models DF80/DF80X or room
temperature in models DFI80/DI80X.
WARNING
The function TURBO FREEZING will not work in
case the function BEVERAGE FAST COOLING
is working or selected before (this information
is valid only for models DF80 and DF80X).
Indicator of High Temperature in the Freezer
and/or Fridge Compartment (DFI80/DI80X)
This indicator will turn on every time the Freezer and/or
Fridge compartment temperature is higher (hot) than
the proper temperature for storage.
We recommend not to perform freezer and/or fridge
load when the indicator of high temperature is on.
Keep temperature setting of freezer compartment at
maximum and wait a few minutes until the indicator is
off. In case this indicator remains on for a long period,
contact Technical Service.
Indicator of Water Filter Replacement (DFI80/
DI80X)
Indicates when the water filter expired and must be
replaced.
The filter must be purchased in the Technical Service.
After the filter replacement, by pressing at the same
time buttons PARTY and FRIDGE TEMPERATURE,
for approximately 3 seconds. This operation will turn
off the luminous indicator and will restart the 500 liters
count (filter useful life) of the new filter.
Indicator of Door Opened (DFI80/DI80X)
This indicator stays on as an alert while any of the doors
(refrigerator or freezer) remains open.
BUTTON/Function PARTY
The function, when selected, maintains the freezing
capacity at maximum, and cooling capacity for 6 hours,
even with several door openings. To activate this func-
tion by pressing the button “PARTY” once (DFI80/
DI80X) or press the button “AUTO CONTROL” twice
(DF80/DF80X). The function Party can be deactivated
at any time, by pressing the button “PARTY” (DFI80/
DI80X) or button “AUTO CONTROL” (DF80/DF80X).
Button/Function Shopping
The function, when selected, keeps the freezing capac-
ity at maximum, allowing a fast freezing and cooling
of new food.
The function Shopping has a duration of 3 hours,
although it can be deactivated at any time, by press-
ing the button “SHOPPING” (DFI80/DI80X) or button
“AUTO CONTROL” (DF80/DF80X). This function
activates open door alarm to start tinging only after
10 minutes.
WARNING
The water outlet in the dispenser will be interrupted
at the moment the Ice Maker is being refilled.
Fill up only with potable water.
Button “ICE MAKER” (Automatic Ice Maker
– only in models DFI80 and DI80X)
By pressing this button, the ice maker is turned on and
the ice starts to be made automatically.
Make sure there is water in the water supply at all
times, so the ice can be made. The lack of water in
the water supply is indicated on
the display according to the pic-
ture. To deactivate the automatic
ice maker at any time, press the
button “ICE MAKER”.
To remove the “ rA “ from the display you must refill
the water supply, wait a few minutes so the water can
go through the filter and press the Button Ice Maker
again. The fact “ rA “ does not appear on the display
does exempt the lack of water from the water supply,
because the water use by the Water Dispenser is not
monitored by this alert.