background image

35

Technical data

Model

CK 450

CK 460

CK 470

Airflow

Max.

320 m ³/h x) 180 m ³/h 320 m ³/h x) 180 m ³/h 320 m ³/h x) 180 m ³/h

Min.

160 m ³/h

160 m ³/h

160 m ³/h

Size

Height

45 mm

45 mm

45 mm

Width

498 mm

598 mm

698 mm

Depth

445 mm

445 mm

445 mm

Light

Max 11 W PL

Max 11 W PL

Max 11 W PL

Grease filter

1 pc.

1 pc.

1 pc.

Voltage

230 V

230 V

230 V

Total power

111 W

111 W

111 W

x) Valid when the cooker hood is fitted with carbon filter.

Fig. 5

Installation

Min

40

cm

Fig. 4

Unpacking

Check that the cooker hood is not damaged.

Transportation damages should immediately be

reported to the transport company. Damages, faults

and eventually missing parts should immediately be

reported to the retailer. Dispose carefully of the

packaging material so that it is out of the way of small

children. Remove the transport supports (C-Fig. 9).

Position

The cooker hood should be mounted freely hanging on

the wall. The cooker hood must be at least 40 cm

above electric burners or electric range (Fig. 5). The

cooker hood is not approved for mounting above gas

burners or gas range.

498 / 598

/ 698

445

45

Electrical connection

The electric outlet should be placed above the cooker

hood or inside a wall cupboard. The hood has a power

cord and moulded plug with earth connection for a

wall outlet of 230V.

Содержание CK 450











Отзывы: