Electrolux C 67100 K, Руководство по обслуживанию

Страница: 25 / 29

- 25 -
TSE-N 05.00 A. B. 599 50 82 38 EN
Additional information for the service
Cooktop assembly
- The cooktop assembly conforms to the system of the New Range, i.e. the cooktop frame and the
cooktop glass are two separate parts and not stuck with each other.
- After disassembling the cooktop take care that the 7-segment display and, with the self-sufficient
built-in cooktops, the control panel are not in the cooktop cover, but is clipped to the cooktop glass
from below.
Cooktop technology
- With the twofold induction, the induction hot plates are front right and left, not laterally one after the
other as with the previous version. The induction module is a twofold module.
- With the fourfold induction, the induction module consists of a block of four.
- With this new series of induction cooktops there are no test points to check the electronic in case
of a malfunction. That means, if the reason for a hot plate, which does not function, is to be found
in a malfunction of the electronic, the only solution is to exchange the module or, with self-sufficient
built-in cooktops, to exchange the control panel. The modules can also not be checked with the
help of a test routine.
Compatibility
- The induction cooktops can only be combined with ranges which are equipped with an ERM (mo-
dular energy regulator), from range series Compentence 2000 onward, classes Top and Comfort.
- Concerning the compatibility of the control lines, these are directly compatible from Century
onward. With the previous range series Competence, the control line is equipped with an adaptor.