Electrolux Built-in appliances, Руководство по обслуживанию

Страница: 17 / 43

- 17 -
DGS-TDS-N 05.09 A. B. © Electrolux 599 518 252 EN
factory
programming
1 2 3 4
5
6 7 8 9
Connection description
4.1.2 Power electronics
4.1.2.1 Power electronic (PB) OVC1000
This circuit board consists of a series of relays, a transformer and additional required components
that are necessary for the communication between the input electronics and power electronics and
which serve in the control of the appliance. It receives the electrical control impulses transmitted by
the input electronics. In accordance with the received impulses, the desired heating element or
small consumer is supplied with electricity. For wiring diagram see chapter 7.
Installation position is on the rear side of the appliance. After removing the rear housing panel, the
power electronics are accessible.
1. Door locking system
2. small load
3. heating elements
4. Electrical voltage supply
5. all-pole cutoff
6. input electronic (UI)
7. Analog Input
8. Digital Input
9. Temperature sensor PT500