92
Note: The bearings, water seal and gasket between
the two tubs come as part of the rear half of
the outer tub. If the water seal or bearings fail,
inspect and if necessary, dress shaft of the
spin basket with a file. With some failures it
will be necessary to replace the spin basket.
Spin basket vanes:
There are three plastic vanes mounted to the spin basket
to aid in the washing action during the wash cycle. Each
vane has (6) tabs that slide into (6) slots in the spin
basket.
Each vane is locked in place by (4) tabs press out of the
spin basket.
Removing the spin basket vanes:
1.
Open the washer’s loading door.
2.
Insert a small shaft common screwdriver into the
hole in top of the vane behind the divided space and
push the (4) locking tabs open.
3.
Slide the vane toward the door opening to release
the (6) tabs and push on the side of the vane to
remove.
4.
When replace or reinstalling, lock the vane in place
with a stainless steel screw through the slot in the
side of the vane.
SCREW SLOT
