2.
Carefully pull the heating element
down.
At this time you can clean the oven ceil
-
ing.
Clean the oven ceiling with a soft cloth with
warm water and cleaning agent and let it
dry.
Installing the heating element
1.
Install the heating element in opposite
sequence.
WARNING!
Make sure that the heating element is cor
-
rectly installed and it does not fall down.
Oven lamp
WARNING!
Be careful! There is the risk of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the circuit breaker.
Put a cloth on the bottom of the oven for protection of the oven light and glass cover.
1.
Turn the glass cover anti-clockwise to remove it.
2.
Clean the glass cover.
3.
Replace the oven light bulb with applicable 300°C heat-resistant oven light bulb.
Use the same oven lamp type.
4.
Install the glass cover.
Cleaning the oven door
The oven door has three panels of glass installed one behind the other. You can remove the
glass panels to clean them.
Removing the oven door and the glass panels
1. Hold the aluminium plate (A) with one
hand and remove the holder (B) of the in
-
ner panel with the other hand. To unlock
the holder (B), press it to the right side
and pull up.
A
B
Care and cleaning
23
Содержание B890905
