S31EUK4090SY(2)99-01
Press button P2 on the control panel to put all the
previously programmed data into memory P2: all
the indicators on the programmer will turn Off
(the only exception being the speed 3 indicator).
Turn the machine Off before removing the
programmer.
Program P3: only suction.
Note
: it is recommended to insert/remove the
programmer while the machine is in the
Off condition.
With the programmer in the panel connector
switch the machine ON; wait until the battery
voltage will appear on the display.
Select the forward running speed (button
"Speed" on the programmer).
Note
: every time a button is pressed an acoustic
signal will be heared.
Enable the suction motor by pressing the
corresponding button: the suction motor will work
for a few seconds.
Press button P on the programmer to confirm the
programmed values: the corresponding indicator
will turn On.
Press button P3 on the control panel to put all the
previously programmed data into memory P3: all
the indicators on the programmer will turn Off
(the only exception being the speed 3 indicator).
Turn the machine Off before removing the
programmer.
Three different cases/examples have been
described above. For every application (different
kind of floor, of dirt to be scrubbed etc.) it will be
possible to choose the optimal automatic
program.
USE OF THE PROGRAMMER
28
