manualshive.com logo in svg

Electrolux AR 4090, Руководство по эксплуатации

Поделиться
Скачать
Electrolux AR 4090 Скачать руководство пользователя страница 22

S31EUK4090SY(2)99-01

USE

USE OF THE "ECO" BUTTON

The "economic" working mode can be enabled 
pressing button "ECO" on the removable 
programmer. By using this functions an 
automatic adjustment of the soution flow to the 
brushes versus the instantaneous speed of the 
machine is got. 

I.e. a high solution flow will be got with a high 
speed and viceversa.

The actual intensity of the solution flow will be 
monitored, in real time, by the number of lighting 
electrovalve indicators.
Also the pump operation will be automatically 
started.

ADJUSTMENT OF THE SOLUTION PUMP 
SPEED

A further adjustment of the solution flow to the 
brushes can be done by means of the rotating 
knob which allows to change the speed - then 
the delivery capacity - of the solution pump. This 
adjustment can be done at any time.

This feature, connected to the use of the "ECO" 
mode, allows an optimal use of the cleaning 
solution versus the different applications (kind of 
floors, heavy or light dirt to be removed etc.); so 
doing the solution consumption can be 
minimized, reducing the time spent for tank re-
filling.

STOP OF THE FLOW OF THE CLEANING 
SOLUTION

When the cleaning solution tank is going to be 
empty an acoustic signal will be heared (five 
beeps) and the relevant indicator will turn On on 
the control panel (see the figure).
After about one minute the acoustic signal will 
restart and the automatic stop of the solution 
pump and electrovalves will occur.
Fill the tank to continue the job.

20

Содержание AR 4090



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды