Electrolux AHT8I, Инструкция по установке и эксплуатации

Страница: 17 / 40

17
Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the machine's
service life. (cont'd.)
Stage Protective
garments
Safety footwear Gloves Glasses Safety helmet
Dismantling
○ ● ○ ○
—
Scrapping
○ ● ○ ○
—
Key:
●
PPE REQUIRED
○
PPE AVAILABLE OR TO BE USED IF NECESSARY
—
PPE NOT REQUIRED
1. During these operations, gloves must be cut-resistant. Failure to use the personal protection equipment by operators, specialized personnel or users can
involve exposure to damage to health (depending on the model).
2. During these operations, gloves must be heatproof and suitable for contact with water and the substances used (refer to the safety data sheet of the
substances used for the information regarding the required PPE). Failure to use the personal protection equipment by operators, specialised personnel or
users can involve exposure to chemical risk and cause possible damage to health (depending on the model).
3. During these operations, gloves must be suitable for contact with chemical substances used (refer to the safety data sheet of the substances used for
information regarding the required PPE). Failure to use the personal protection equipment by operators, specialized personnel or users can involve exposure
to chemical risk and cause possible damage to health (depending on the model).
C TECHNICAL DATA
C.1 Main technical characteristics
Model NHT8/EHT8/
KHT8/HHT8/
XHT8/ZHT8/
VHT7/
ZHT8I/AHT8I/
EHT8I/NHT8I/
HHT8I/XHT8I/
VHT7I/
EHT8M/
EHT8IUSPH5
EHT8M6/
EHT8IUSPH6
EHT8TIL/
ZHT8TIL
Supply voltage:
convertible to
single-phase version
400V 3N~
230V 3~
230V 1N~
400V 3N~
1
230V 3~
1
230V 1N~
1
400V 3~
—
—
440V 3~
—
—
400V 3N~
230V 3~
230V 1N~
Frequency
Hz 50 50 or 60 50 60 50
Max. power
kW
12.9
2
12.9
2
12.9
2
12.9
2
12.9
2
Power absorbed as factory
setting
9.9 9.9 9.9 9.9 9.9
Power absorbed with water
supply at 65
℃ [149 ℉ ]
6.9
3
6.9
3
— — 6.9
3
Boiler heating elements
kW 9.0 9.0 9.0 9.0 9.0
Tank heating elements
kW 3.0 3.0 3.0 3.0 3.0
Water supply pressure kPa
[bar]
50 - 700
[0.5 - 7]
50 - 700
[0.5 - 7]
50 - 700
[0.5 - 7]
50 - 700
[0.5 - 7]
50 - 700
[0.5 - 7]
Water supply temperature:
℃
[ ℉ ]
— for models without ESD 10-65 [50-149] 10-65 [50-149] 10-65 [50-149] 10-65 [50-149] 10-65 [50-149]
— for models with ESD — 10-20 [50-68] — — 10-20 [50-68]
Water supply hardness for
models without incorpo-
rated continuous water
softener
°f/°d/
°e
14/8/10 max 14/8/10 max 14/8/10 max 14/8/10 max 14/8/10 max
Water supply hardness for
models with incorporated
water softener
°f/°d/
°e
53.4/30/
35.7 max
53.4/30/
35.7 max
53.4/30/
35.7 max
53.4/30/
35.7 max
53.4/30/
35.7 max
Electric conductivity of
water for models without
incorporated continuous
water softener
μS/
cm
<400 <400 <400 <400 <400
Concentration of chlorides
in water
ppm
<20 <20 <20 <20 <20
Rinse cycle water
consumption
l 2.0
4
2.0
4
2.0 2.0 2.0
Boiler capacity
l 12 12 12 12 12
Tank capacity
l 24 24 24 24 24