60
How to wash
Starting the programme
1. Check that the water tap is open.
2. Press START/PAUSE to start the programme.
If the light alarm code E40 appears on the display at the start of the
programme it indicates that the door is open. Close the door and
press the START/PAUSE button again.
Programme progress display
By selecting the wash programme, the pilot
lights corresponding to the various phases
making up the programme come on. After the
machine has started, only the running phase
pilot light stays on.
At the end of the programme
The machine stops automatically. A steadly zero appears on the display.
The FIN
(END) light comes on in the programme progress display.
If the x (RINSE HOLD) option has been selected, the START/PAUSE but-
ton goes off, the pilot light FIN
(END) on the programme progress
display illuminates, the lights PUERTA
(DOOR) and STOP
ACLARAD.
remain lit to indicate that the water must be emptied
out.
To empty out water there are two possibilities:
• Select programme DESAGUAR (draining):
The water is emptied out without spinning.
• Select programme CENTRIFUGAR (spin). Select the spin speed by means
of the relevant button and then depress the START/PAUSE button. The
water is emptied out and the laundry is spun at the selected spin speed.
Warning!
The programme selector dial must be turned first to RESET
O/OFF
and then to the DRAIN programme DESAGUAR or CENTRIFU-
GAR (spin).
Turn the selector dial to
O/OFF
to switch the machine off.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
ACLARADO
PRELAVADO/
LAVADO
AC
PUERTA
CENTRIFUGADO
FIN
RINSE
PREWASH/
WASH
EXTRA
RINSE
DOOR
SPIN
END
132982560_gb.qxd 10/02/2006 17.20 Pagina 60
