Electrolux 520003, Инструкция по эксплуатации

Страница: 17 / 47

10
E Assembly and Installation
Important Information!
For install the machine, one must
wear the proper personal protective
equipment (safety shoes, gloves,
glasses, working clothes, etc.), tools,
appliances and auxiliary means must
be provided for professional
technicians.
E1 Customer's Responsibilities
The Customer must make the following
preparations:
- Disconnector, 30 mA residual current
circuit-breaker and overcurrent protection
device (for manual resetting or with fuse for
magnetic thermal cutoff) with at least equal to
electrical capacity indicated in the technical
data sheet shall be installed between the
equipment and outlet socket. The devices you
selected must be able to be locked in the "OFF"
position during maintenance.
- A correct power supply is installed before the
machine according to the equipment technical
specifications (see Table 1 and C2 "Features of
Power Supply").
- The electrical system at the workplace is
equipotential bonded to the metal structures of
the Machine with copper cables of proper
component (see the Position B of E6.2
"Installation Drawings").
-
Electrical connection between the electrical
panel and equipment at the workplace;
- Connection for water supply, drain pipe and etc.
indicated in Table 1 and E6 "Connection to
Pump Unit".
E2 Features of Machine Installation Site
The Machine is designed for kitchen installation
instead of for household. The sump/metal grill
must be arranged on the floor for machine water
drainage (see E6.2 "Installation Drawing". It is
possible to use a single sump with flow rate of 3
L/s at least.
E3 Machine Space Restriction
A proper space must be kept around the machine
for easy operation, maintenance, etc. The
operator's access to machine must be 50cm wide,
except the rear of the Machine.
The passage must be widened if it used for
operating and/or transferring other equipment
and/or tools or the workplace must have route to
exit.
E4 Positioning
This machine must be installed in place and the
mounting plate can only be removed at the time
of machine installation.
Important Information!
Keep the dishwasher away from heat sources
such as frying pan, oven or heating plate, etc.
Machine arrangement:
•
Unpack the machine using protective gloves
(Figure 5).
Figure 5 Unpacking
•
Use a forklift to lift the equipment. Remove the
mounting plate, and position the equipment in
place (Figure 5).