background image

17

LOCKING THE CONTROLS

Setting Surface Controls

The Cooktop Controls may be locked in order to prevent the cooktop from accidentally
being turned ON. This feature can be activated only when no cooking zone is active.

MINUTE TIMER

The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of
time. This feature will keep track of time from 1 to 99 minutes. The LED display will begin
to count down minutes once set.

To Set the Minute Timer:

1.

Touch the   adjacent to the minute timer display. Touching and releasing the   or
the 

 key pads will increase or decrease the Minute Timer setting by 1 minute with

each key press (up to 

99

99

99

99

99

 minutes).

2.

Once the Timer display shows the desired amount of time, release the   or 

 key

pads to allow the minute timer to begin the countdown. Once the Minute Timer
reaches 

00

00

00

00

00

 long beeps will sound indicating that the time is up. To stop the control

from beeping, touch the 

timer

 key pad.

To Cancel the Minute Timer:

1.

Touch the 

timer

 key pad or touch and hold either the 

 or 

 key pad and scroll to 

00

00

00

00

00

.

2.

If cancelling the Minute Timer using the scrolling method, once the Minute Timer
display reaches 

00

00

00

00

00

, release the key pad.

3.

The Minute Timer display will turn off indicating that the Minute Timer is no longer
active.

med

Fig. 1

To Turn ON the Controls Lock Feature:

Touch and hold the 

lock

 key pad. After 5 seconds a beep will sound. The Lock

Indicator Light located above the 

lock

 key pad will turn ON indicating the cooktop is

locked. Some power level indicator lights will glow (Fig. 1) indicating that the
cooktop can’t be used. This will keep any Cooking Element or Cooktop functions
from being accidentally turned ON. Note: If the cooktop is in used when the
Control Lock Feature is turn on, it will be impossible to lock the cooktop. Turn
OFF all the cooking zones prior to set the Control Lock Feature.

To Turn OFF the Controls Lock Feature:

Touch and hold the 

lock

 key pad. After 5 seconds a beep will sound. The Lock Indicator

Light above the 

lock

 key pad will  turn OFF indicating the cooktop is unlocked. The Cooking

Elements or any of the other Cooktop functions may now be used.

Содержание 36" Ceramic



























Отзывы: