background image

6

02644

02

6

4

5

02643

  BAGGER SUPPORT ASSEMBLY
  (See Figs. 2A & 2B)

NOTE:

 If your tractor already has four (4) shoulder bolts 

installed on the rear drawbar, simply hang the support as-
sembly on the bolts. Discard the four (4) shoulder bolts 
supplied and go on to Step 3 in struc tions.

2

SELF
TAPPING
SHOULDER
BOLTS

FIG. 2C

PULL OUT ON STOP BRACKET TO 
REMOVE SUPPORT ASSEMBLY

FIG. 2B

If your tractor does not have four (4) shoulder bolts installed 
on the drawbar, follow the instructions below.

Use Hardware - - GROUP "B"

1.    Using the four formed holes in the drawbar, install the 

four shoulder bolts as shown and tighten securely.

2.    Hang the support assembly on the bolts.

SHOULDER
BOLTS

FIG. 2A

TO REMOVE THE SUPPORT ASSEMBLY (See 
Fig. 2C)

1.      Pull outward on the stop bracket enough to allow support 

assembly to be lifted up and away from drawbar.

3

FIG. 3

 

MOUNTING COVER ASSEMBLY TO  

 

SUPPORT ASSEMBLY (See Fig. 3)

NOTE

:  For ease of assembly, you may wish to obtain the 

as sis tance of another person for mounting cover assembly 
to tractor.
1.    Position cover assembly on ground behind tractor as 

shown.

2.    Lift and rotate cover to align cover bracket with support 

assembly.

3.   Slide cover assembly down onto the support 

assembly.

02646

COVER
ASSEMBLY

SUPPORT
ASSEMBLY

SUPPORT
ASSEMBLY

SUPPORT
ASSEMBLY

Содержание 183159














Отзывы: