background image

3

TABLE OF CONTENTS

CUSTOMER RESPONSIBILITIES............................... 13
STORAGE .................................................................... 13
PREPARATION ....................................................... 14-15
REPAIR PARTS................................... Center of Manual

SAFETY RULES ......................................................... 2-3
BAG OF PARTS .......................................................... 4-5
ASSEMBLY ............................................................... 6-11
OPERATION ................................................................ 12

CONGRATULATIONS 

on your purchase of a new Grass Catcher. It has been designed, en gi neered and manu fac tured to 

give you the best pos sible de penda bil ity and per form ance.

Should you experience any prob lems you can not easily remedy, please contact your nearest au tho rized service center/
department. They have com pe tent, well trained tech ni cians and the proper tools to service or repair this unit.

Please read and retain this manual. The in struc tions will enable you to assemble and main tain your Grass Catch er properly. 
Always observe the "SAFETY RULES".

Look for this symbol to point out 
im por tant safety precautions. It means 
CAU TION!!!   BECOME ALERT!!!  YOUR 
SAFETY IS INVOLVED.

CAUTION:  In order to prevent 
accidental starting when setting 
up, transporting, adjusting or making 
repairs, always disconnect spark 
plug wire and place wire where it 
cannot contact spark plug. 

•      Be sure the area is clear of other people before mowing. 

Stop machine if anyone enters the area.

•      Never carry passengers or children even with the blades 

off.

•           Do not mow in reverse unless absolutely necessary. Always 

look down and behind before and while backing.

•      Never carry children. They may fall off and be seriously 

injured or interfere with safe machine operation.

•           Keep children out of the mowing area and under the watchful 

care of another responsible adult.

•      Be alert and turn machine off if children enter the area.
•      Before and when backing, look behind and down for small 

children.

•      Mow up and down slopes (15° Max), not across.
•      Remove obstacles such as rocks, tree limbs, etc.
•           Watch for holes, ruts, or bumps. Uneven terrain could overturn 

the machine. Tall grass can hide obstacles.

•      Use slow speed. Choose a low gear so that you will not 

have to stop or shift while on the slope.

•      Avoid starting or stopping on a slope. If tires lose traction, 

disengage the blades and proceed slowly straight down the 
slope.

•       If machine stops while going uphill, disengage blades, shift 

into reverse and back down slowly.

•      Do not turn on slopes unless necessary, and then, turn 

slowly and gradually downhill, if possible.

CAUTION:  Do not coast down a hill 
in neutral, you may lose control of 
the tractor.

CAUTION:  Tow only the attachments 
that are recommended by and 
comply with specifications of 
the ma 

nu fac tu rer of your tractor.  

Use common sense when towing.    
Operate only at the lowest possible 
speed when on a slope.  Too heavy 
of a load, while on a slope, is 
dangerous.  Tires can lose traction 
with the ground and cause you to 
lose control of your tractor.

SAFETY RULES

Safe Operation Practices for Ride-On Mowers

Содержание 156235




















Отзывы: