The machine is designed and made in compliance with:
- Machine directive 2006/42 EEC,
- The EMC directive 2014 / 30 EU,
- 2011/65/EU Directive on the restriction of the use of certain
hazardous substances
- «WEEE» Directive 2002/96/CEE
The symbol “ ” on the product indicates that this product must
not be treated as household waste. On the contrary, it must be taken
to an electric and electronic equipment recycling point. By ensuring
that the product is properly disposed of in this way, you are helping
to prevent damage to the environment and human health that could
otherwise occur if the product is not disposed of in a controlled manner.
For more information about the recycling of this product, please contact
the sales department or supplier of the product, the after sales service
or the appropriate waste treatment services.
- «Waste» Directive 2006/12/CEE
The machine is designed in order to contribute as little as possible, if
at all, to the quantity and noxious nature of waste and risks of pollution.
Please comply with the recycling conditions.
- «Packaging and packaging waste Directive 94/62/CEE
The machine packaging is designed in order to contribute as little as
possible, if at all, to the quantity and noxious nature of waste and risks
of pollution.
Please make sure the various packaging materials are disposed of in
the appropriate recycling points.
- European standards:
EN 454- - Beaters-Mixers. Safety and hygiene regulations.
EN 60204-1-2006 machine electrical equipment
This compliance is certified by:
- The CE compliance mark attached to the machine.
XBM10 GB 05 2016
8
Compliance with legislation
- The corresponding CE declaration of conformity, associated
with the warranty,
- This instruction manual, which must be given to the operator.
Acoustic specifications:
- The acoustic pressure level measured in accordance with the
test code EN ISO 3743.1-EN ISO 3744 <70 dBA.
Protection indexes according to standard EN 60529-2000:
- Electrical controls IP55
- Machine as a whole IP23
Electromagnetic compatibility complies with standards:
- EN 55014-1: Emission -
- EN 55014-2: Immunity -
Built-in safety:
- The machine has been designed and manufactured in com-
pliance with the relevant regulations and standards referred
to above.
- Before using the attachment, the operator must be trained
to use the attachment and informed of any possible residual
risks.
Food hygiene:
The machine is made of materials that comply with the following
legislation and standards:
- Directive 1935/2004/CEE: Materials and objects in contact
with foodstuffs.
- Standards EN 601- : Cast aluminium alloys in contact with
foodstuffs.
- Standards EN 1672-2- : Instructions relating to hygiene
The surfaces of the food area are smooth and easy to clean. Use
detergents that are approved for food hygiene and respect the
instructions for their use.
