D1662
STOP
+
-
+
-
1
2
…
1.........
2.........
3.........
4.........
180
5,5
m
°C
min
250
1
D1639
1
4619
5
4
INSTRUCTION
HANDBOOK
01102060
Notice
Date Page
Easy start
Easy start
MANUAL mode selection
To go in DIAMMS
mode, push on :
"Diamms/Manual"
To go in ejection
mode, push on :
"Ejection"
To go in select
program mode,
push on :
"Select program"
During the operating
cycle, the display
shows the opposite
informations and
commands in
MANUAL mode.
To go in without
folding mode, push
on :
"Folding"
To go in feeding
mode, push on :
"Feeding"
To stop the operating
cycle, push on :
"Stop"
If you push on
you go in manual mode.
In this mode, you select in the
following menus, the temperature and
the ironing speed you want apply to
use the machine.
Set temprature
Ironing speed
"MANUAL MODE" display
u
"DIAMMS MODE"
display (previous page)
u
"STOPPING"
menu (next page)
Now the display waits
for you to select the
set temperature for the
ironing.
The ironing temperature
can be adjusted degrees by degrees
Celsius by push.
N. B. : if you want a temperature below
100°C, the display shows a sign (0) to
indicate that the heating is cut off and
allows the machine to work without
heating.
Now the display waits for
you to select the ironing
speed.
The ironing speed is
adjusted between a
minimal value and a maximal value in
the Setting mode. The adjustment can
be modified 1/10 by 1/10 of meter by
push.
Note that the minimal and maximal
ironing speeds are in accordance
with the adjustment parameters of the
converter.
4. Machine operation
