Electrolux Professional 588094, Инструкция по установке и эксплуатации

Страница: 20 / 34

20
Access to the main power connection
G INSTALLATION AND ASSEMBLY
G.1 Appliance type
When describing our appliances, we distinguish between top
modules
A , base modules B and factory-assembled units C .
Top and base modules can be set up together or as individual
units.
The appliance must always be installed in its intended location
according to the relevant installation and connection diagrams
(F
Installation DIAGRAMS ). The appliance should be con-
nected to fixed cables.
Installation options:
1. Wall mounted
2. Standing against the wall
• on adjustable feet
• on steel plinth
• on concrete plinth
3. Free standing
• on adjustable feet
• on steel plinth
• on concrete plinth
WARNING
The appliance is suitable for
setting up only as a group of
appliances
or wall mounted,
refer to A.10 Positioning .
IMPORTANT
In free standing option it can be positioned
freely in the space, installed side by side or
back-to-back with other appliaces of the same
range, but it’s not available for a stand alone
installation.
When installing side by side, appliances are connected to a rail.
Different wall frames are used when setting up against a wall.
The ventilation engineer is responsible for assessing/planning
a technically correct ventilation.
G.2 Distances / walls
The appliance must not be installed on flammable walls. If an
appliance is set up next to or against temperature-sensitive
furniture or similar, keep a safety-distance of approximately 50
mm or fit some form of heat shield.
When installing the unit in the immediate vicinity of walls,
partitions, kitchen units, decorative panels, etc., we recom-
mend that these are either made from non-combustible
materials or coated/tiled in suitable, non-flammable materials.
The local fire protection regulations must be fully complied with.
G.3 Before installation
Depending on your model, prepare the following before the
appliance is installed and positioned correctly:
• Fastening elements, i.e. drill holes and insert dowels. You
can find accompanying notes in the relevant sections on
G.5
Wall installation .
• Prepare water, gas and electrical connections and install a
shut-off valve, if necessary.
2
1
1
1
1
250
450 / 550
A
B
C