manualshive.com logo in svg

Electrohome VistaGraphX 5000, Руководство пользователя, Страница: 64 / 116

Поделиться
Скачать
Electrohome VistaGraphX 5000 Скачать руководство пользователя страница 64

Downloaded from Projector.com

23(5$7,21

9LVWD*5$3+;

8333

8VHU

*

V 0DQXDO

606;

projector until you press 

 again and enter a different number, or until you

switch to broadcast mode (below).

NOTE:  If you are using a computer or controller to issue commands, use the
correct RS-232 software command to gain control of a single projector.

On the IR remote or wired keypad, press 

 to display the projector box. Press

)XQF

 without entering a number — the keypad commands will now affect all

projectors.

Make certain that only one projector has its "Broadcast Keys" option selected
(checked) — the remaining projectors should have the option unchecked and
their keypads disabled (do this in Communications menu). The "Broadcast Keys"
projector will then relay keypad commands to the others. If using a wired
remote, make sure to select the “Broadcast Keys” option for the projector to
which it is connected.

NOTE: If you are using a computer or controller to issue commands, use the
correct RS-232 software command to broadcast.

If you would like to be notified on-screen of error conditions, turn on this option
from within the Preferences menu (enter a checkmark in the “Display Error
Messages” box). Should a user error message ever appear, press the 

 key to

confirm the message and eliminate the message box. A system error must be
resolved in order to eliminate its message box.

,QYDOLG 8VHU (QWU\

Any entry not recognized by VistaGRAPHX 5000 will call up this message as
well as a brief description and suggestions for solving the problem, even if the
“Display Error Messages” box in Preferences menu is unchecked (turned off).
Press 

 to confirm the message and eliminate the message box.

1R 6LJQDO

The message "No signal present: check the source or connections to the
projector" is displayed when there is no signal on the selected input. This means
that both HSYNC and VSYNC are inactive and the screen background is black.

%DG 6\QF

The message "Bad Sync" followed by a short description of the problem is
displayed when HSYNC or VSYNC are active but the signal cannot be
displayed. Such a condition occurs when only one of the two signals is present,
or when either signal is unstable or of the wrong frequency.

NOTE: "Bad Sync" or "No Signal" errors must be resolved in order to eliminate
the error message. In the meantime, press 

 to use the menu system (other

functions remain operational).

6WDWXV /('V

If the "Status" LED on the back of the projector repeatedly flashes a pattern of
yellow and red light while the "Power" LED glows a continuous red, you have
encountered a possible system error requiring the attention of a qualified service
technician. Contact your dealer or Electrohome if the problem persists.

%URDGFDVWLQJ WR

ö

$OO 3URMHFWRUV

61<

(UURU &RQGLWLRQV

8VHU (UURUV

ö

6\VWHP (UURUV

ö

Содержание VistaGraphX 5000





















































































































Отзывы:

Нет отзывов