Electrohome VistaGraphX 5000, Руководство пользователя, Страница: 44 / 116

Downloaded from Projector.com
23(5$7,21
9LVWD*5$3+; 8333 8VHU * V 0DQXDO
604;
The Channel List (Figure 3-8) displays a table of all defined channels and how
they are connected to the projector. The numbers in the far left column represent
each channel number defined so far, automatic or not. Other columns list details
pertaining to each channel setup, such as its name, switcher number, slot location
and other information.
The last two columns in the Channel List menu list the frequencies and polarity
(“ + ” or “ - “) detected for each channel signal. If neither symbol is present,
there is no sync.
Use the scroll bar to see and work with any additional channels not visible in the
table.
)LJXUH 60;1 &KDQQHO /LVW 0HQX
Beneath the Channel List window, select the "New" button, which will store the
current signal as a channel with the following defaults assigned:
•
channel number = the lowest unassigned number (up to 99).
•
switcher (SW) number = 0 (represents the projector itself). Or, if the input
source is connected to a switcher, the default will be the lowest switcher
number available (from 1-9).
•
slot (SL) = 1 ( ,QSXW 4 ), 2 ( ,QSXW 5 ), 3 ( ,QSXW 6 ), or 4 ( ,QSXW 7 ) for projector inputs, or
current slot number (1-9) if the source is connected to a switcher.
•
InMenu = checked. The source will then appear in the channel list whenever
&KDQ key is pressed.
•
AutoSource = checked. The projector will be able to automatically find this
channel on power up if the input signal matches.
67(3 5