Electrohome iC1088WK, Руководство пользователя

Страница: 10 / 22

Specifications
General
Power Source AC 100-240 – 50/60Hz
DC 3V, 2 X 1.5V AAA batteries
(not included) for memory
Dimension 154(W) x 132(H) x 194(D) mm
Tuner
Frequency Range FML 87.5 – 108 MHz
Audio
Power Consumption 2 x 1.5W
Speaker Impedance 8 ohms
- 8 -
The FCC Wants You to Know
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Contact your local electronic store for help.
NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the Radio Interference Regulations of Industry Canada.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television operation (which can be determined by turning the equipment off), the
user is encouraged to try to correct the interference by one or more of the measures
described above.
"Made for iPod," "Made for iPhone," mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries.