Electrohome EAAC600, Руководство пользователя

Страница: 12 / 28

- 12 -
SPECIFICATIONS
WARNINGS
WARNING
1. No naked flame sources, such as lighted candles, should be placed on the apparatus.
2. Do not place the product in closed bookcases or racks without proper ventilation.
3. The mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
4. The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
5. It shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
6. Do not connect FM antenna to outside antenna.
7. The unit should not be exposed to direct sunlight, very high or low temperature,
moisture, vibrations or placed in dusty environment.
8. Do not use abrasive, benzene, thinner or other solvents to clean the surface of the unit. To
clean, wipe it will mild non-abrasive detergent solution and clean soft cloth.
9. Never attempt to insert wires, pins or other such objects into the vents or opening of
the unit.
10. batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
11. Attention should be drawn to the environmental aspects of battery disposal.
Do not dispose this product into usual household garbage at the end of its
lifecycle; hand it over to a collection center for recycling the electrical and
electronic appliances. by recycling, some of the materials can be reused. You
are making an important contribution to protect our environment. Please
inquire your community administration for the authorized disposal center.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Frequency Range: AM 530 - 1710 kHz
FM 88 - 108 MHz
Power Supply: AC 120V ~ 60Hz, 5W
battery backup: DC 3V CR2032 (battery included)
Indoor Temperature Range: 0 to +50° C or 32 to 122 ° F
Specifications are subject to change without notice.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.