14
Y
P
B
P
R
Connections to other equipment
To connect the Plasma Display to a DTV receiver/set-top box
If you connect a DTV receiver/set-top box, connect your Plasma Display to a DTV receiver/set-top box using a
component video cord.
Rear lower of the Plasma Display
To Component OUT
To Audio OUT
Component video cord (not supplied)
(Red, Green and Blue)
Audio cord (not supplied)
(Red, and White)
To COMPONENT IN-1 (or 2)
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the
Plasma Display’s remote control.
To control the audio, turn on the Plasma Display and the stereo amplifier, and turn off the Plasma Display’s built-in
speakers (see “Turning off the built-in speakers” on page 31).
NOTE:
To hear sound when using an external audio amplifier, the volume of both the Plasma Display and the amplifier must
be set above 0 (zero).
For example, if the volume of the Plasma Display is set to 0, you will not be able to hear any sound, even if the
volume of the amplifier is at its highest level.
To Audio (L) Input
To Audio (R) Input
Audio cord (not supplied)
(Red, and White)
Amplifier
VARIABLE AUDIO (R)
OUTPUT
VARIABLE AUDIO (L)
OUTPUT
Rear lower of the Plasma Display
NOTE:
To change the TV mode to this connected device please review “Selecting the video input source” on page 19.
3Y80821A_En_p12-16
6/21/06, 1:47 PM
14
