13
ENGLISH
Y
P
B
P
R
Rear lower of the Plasma Display
To connect the Plasma Display to a DVD player/Satellite receiver
If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.
Rear lower of the Plasma Display
To S-Video OUT
Audio cord (not supplied)
(Red, and White)
To Audio OUT
S-Video cord (not supplied)
To S-VIDEO IN-1 (or 2)
To connect the Plasma Display to a DVD player with component video
If your DVD player has component video out jacks, connect your Plasma Display to a DVD player using a component
video cord. It can greatly enhance picture quality and performance.
To Component OUT
To Audio OUT
Audio cord (not supplied)
(Red, and White)
Component video cord (not supplied)
(Red, Green and Blue)
To AUDIO
IN 1 (or 2)
To COMPONENT IN-1 (or 2)
NOTES:
•
Component Video input of this unit are for use of device which output 480i/1080i interlaced signals and 480p/720p
progressive signals.
•
To change the TV mode to this connected device please review “Selecting the video input source” on page 19.
Connections to other equipment
NOTE:
To change the TV mode to this connected device please review “Selecting the video input source” on page 19.
3Y80821A_En_p12-16
6/21/06, 1:47 PM
13
