background image

6.

Cleaning

1. Safety instructions

Please carefully read these instructions as they include 

valuable information for installation, operation and maintenance

of this device.

Warning

Keep this manual for future consultations. If you resell your moving head to an

other individual, make sure to also give him this manual.

Unpack and carefully check that the moving head didn’t take any damages during

the transport before using it.

Before any connection, make sure that both the voltage and the frequency of your

power source match your moving head specifications. 

Check your device as well as your equipment’s grounding.

This device is only meant for indoor use ; protect it from heat and humidity (allowed

ambient temperature from 10 to 40°C).

The moving head must be set up in a ventilated area, at least 50cm away from any

adjacent surface. Check that no ventilation hole is blocked.

 

Unplug   the   moving   head’s   power   source   before   any   maintenance   or   handling

operation.

Only replace the fuse by a fuse of the same type.

In order to avoid any fire hazard, check for any flammable source nearby. 

Use safety cables to secure the moving head. Hold the moving head only by its

carrying handles to avoid degradation and risk of injury. 

Switch off the power and let the  moving head cool down for about 15 minutes

before transport, for the moving head’s surface may be hot still.

In the event of a serious functioning problem, stop immediately to use the device.

Do   no   ever   try   to   repair   the   device   by   yourself.   Repairs   made   by   unqualified
individuals   may   cause   damages   or   malfunctions.   Contact   the   nearest   approved

3

 

Содержание M SPOT 200II










Отзывы: