ELECTROCOMPANIET RENA S-1, Быстрый старт, Страница: 6 / 16

6
SETUP 3 : STEREO WIRELESS SETUP CONFIGURATION
( 2 x TANA L-1 )
Position your speakers for a STEREO setup ( figure 2 ).
If you are using a tablet once the speaker is detected, drag the speaker
from the bottom line to the correct position (Right - Left).
If you are using a smartphone select the position from the pop-up menu.
(Tap on a speaker to play a test tone.)
If speakers icons are missing, tap on SCAN to search, then repeat SETUP 2
from beginning.
Tap Next (upper right corner) when you are done.
Audio Settings
Choose the type of speaker that you’ve attached to your existing stereo system. For example, “small” for
speakers small enough to hold in your hand, or “bookshelf” for speakers placed on benches and in book -
shelves.” Tap Next (upper right corner) when you are done.
SETUP 3 : WIRED CONNECTION TO A STEREO SYSTEM
Connect RENA-S1 to your existing stereo system by using COAX S/PDIF
or Line output. (If you are using a tablet, drag an output icon to Left or
Right position, tap on the output icon to play a test tone.) If you are using
a smartphone select the position from the pop-up menu.(Tap on the output
icon to play a test tone.) If output icons are missing, tap on SCAN to search,
then repeat SETUP 3 from beginning. Tap Next (upper right corner) when
you are done.
SETUP 2: STANDALONE WIRELESS
SPEAKER CONFIGURATION ( TANA L-1)
Position your speaker for a STANDALONE setup ( figure 1 ).
Next step is to identify your Add-on wireless speaker for a standalone setup. If
you are using a tablet, you will see a speaker icon placed at the middle, tap
on a speaker to play a test tone. If the speaker icon is missing, tap on SCAN
to search for it. Drag the speaker into the correct position when it’s detected,
( if you are using a tablet), or select the position from the pop-up menu ( if you
are using a smartphone).
Tap Next (upper right corner) when you are done.
YOUR EXISTING AUDIO SYSTEM
RENA S-1