S E T U P
M E N U
O P T I O N S
69
Speaker Settings
You can set the size, distance and trim level for each speaker by using the
LEFT/RIGHT ARROW
buttons to move the cursor to highlight the speaker and then press the
ENTER
button. The
Speaker
Settings
menu on the right side of the screen will be activated. In
Speaker Settings
, use the
UP/DOWN
ARROW
buttons to select a parameter, and then press the
ENTER
button to change it. To exit the
Speaker Settings
menu and return to the Speaker Configuration illustration, press the
LEFT ARROW
button or select the
Exit
option. You can also move on to configure the next speaker by selecting the
Next Speaker
option.
The following speaker parameters can be configured:
1.
Size
: The following speaker size parameters control bass filtering for the speakers.
x
Large
– All audio content is passed to the appropriate speaker.
x
Small
– All audio content, except for bass frequencies, is passed to the appropriate speaker.
The purpose is to reduce possible distortion. If a subwoofer is available, bass frequencies are re-
directed to the subwoofer, otherwise, they are discarded. The bass frequency upper limit is set
by the
Crossover Frequency
selection in the
Setup Menu
(see page 71 for details).
x
Off
– Speaker for the corresponding position does not exist. Audio for the missing speaker is
redirected to other speakers or discarded if redirection is not possible.
x
On
(for Subwoofer only) – Specifies that a subwoofer is available.
NOTE
The
Size
for Front, Surround and Surround Back speakers is configured in pairs. Changes to
the size of one speaker will automatically change the other of the pair.
2.
Distance
: The speaker distance parameters set delay control for the corresponding audio channel.
The delay is to compensate for the audio propagation time difference caused by the placement of
speakers.
Speaker distance compensation is not required if the A/V receiver has the capability to adjust
channel delay and compensate for speaker distance differences. However, if your receiver does not
have such functions (most receivers do not offer these functions for their multi-channel analog input),
you may adjust them through the player. Speaker distance delay is only applied if the player is
decoding multi-channel audio. If you use bitstream audio output to your A/V receiver, the bitstream
audio is not adjusted for speaker distance delay.
