8
Using the remote control
When using the remote control, the front end of the remote control should be pointed to
the front panel of your ECI 80D. A free line of sight is required between the remote con-
trol and the infrared sensor on the front panel.
1. MUTE: Mute/enter PREOUT mode
2. STANDBY: Standby button
3. TL1: Select TL1 input
4. TL2: Select TL2 input
5. AN1: Select AN1 input
6. PH: Select PHONO MM input
7. DIM: Display dimming
8. PLAY/PAUSE: Bluetooth play/pause
9. PREVIOUS: Bluetooth previous track
10. NEXT: Bluetooth next track
11. PAIR: Bluetooth pairing
12. VOL UP: Increase volume
13. VOL DOWN: Decrease volume
14. HEADPHONES: Enter HEADPHONES mode
15. IN-: Change source left
16. IN+: Change source right
Battery
The remote control uses one included CR2032
battery. Before first time use of the remove control,
please remove the internal plastic liner under the
rear battery cover by pulling the protruding tab.
When replacing the battery please rotate the bat-
tery cover counterclockwise and carefully observe
the correct polarization of the battery before insert-
ing a new battery. Please remove the battery when
the remote control is not used for a prolonged
period of time.
1
3
4
8
9
5
15
11
2
7
12
10
13
6
14
16
REMOTE CONTROL
The buttons are listed below as KEY NAME: Button functionality.
