background image

Dual Range Tester – R18 

 

LIABILITY DISCLAIMER 

A person who constructs or works on electronic equipment may be exposed to hazards, including physical injury, the risk of 
electric shock or electrocution..  These hazards can result in health problems, injury, or death.  Only qualified persons who 
understand and are willing to bear these risks themselves should attempt the construction of electronic equipment.  By 
purchasing this item, the buyer acknowledges these risks.

 

There is a risk of electric shock, electrocution, burns, or fires that is 

inherent in the construction and use of electronic equipment.  By purchasing this item, the buyer acknowledges these risks.

 

IN NO EVENT SHALL THE SELLER BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY 
NATURE including, but not limited to, property damage, personal injury, death or legal expenses. Buyer's recovery from Seller for 
any claim shall not exceed the purchase price paid by Buyer for the goods, irrespective of the nature of the claim, whether in 
warrant, contract or otherwise. By purchasing this item, BUYER AGREES TO INDEMNIFY, DEFEND AND HOLD SELLER 
HARMLESS FROM ANY CLAIMS BROUGHT BY ANY PARTY REGARDING ITEMS SUPPLIED BY SELLER AND INCORPORATED 
INTO THE BUYER'S PRODUCT. 

 

Содержание tracER-A







Отзывы: