Electro-Voice ZLX Series, Руководство по установке

Страница: 21 / 36

ZLX Powered Loudspeaker Series Amplifier DSP | en 21
Electro-Voice Installation manual 2018.04 | 01 | F.01U.349.854
TREBLE Menu
The Treble menu is used to adjust the high frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a high shelving filter
that is centered on 6 kHz.
The range is -10 dB to +10 db.
The default is
zero (0).
BASS Menu
The Bass menu is used to adjust the low frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a parametric EQ filter
that is centered on 60 Hz.
The default is
zero (0).
MIX OUT Menu
The Mix Out menu is used to select which channel of the BT signal should be output at MIX
OUT and which channel should be delivered by the loudspeaker.
–
L+R: The left and right signals of BT are summed. The sum is output at MIX OUT and is
delivered by the loudspeaker. (Default)
– R: Only the right signal of BT is output at MIX OUT. The loudspeaker will deliver only the
left signal.
LED Menu
The LED menu shows power on and indicates limit. Available options for this selection are:
ON, OFF or LIMIT.
–
ON – turns the LED on when the power to the loudspeaker is ON. (Default)
– OFF – turns the LED off.
– LIMIT – turns the LED off under normal operation. The LED brief blinking indicates the
limiter is activating. Short-term blinking is not critical because the integrated limiter
keeps distortion under control. Constant lighting of the LED indicates the sound is
negatively affected. If the LED is constantly lit, check the rear LCD for more information.
Reducing the output volume is strongly recommended.
LCD DIM Menu
The LCD Dim menu is used to dim the display when the display is idle for two minutes.
Available options for this selection are: ON or OFF.
The default is
ON .
CONTRAST Menu
The Contrast menu is used to increase or decrease the visibility of the LCD screen.
The range is -10 dB to +10 db.
The default is
zero (0).
STORE Menu
The Store menu allows you create up to five customized user settings. Available options for
this selection are: EXIT, 1, 2, 3, 4, and 5.
Notice!
The customized user setting name can contain a combination of alphanumeric characters
including spaces. The alphanumeric character range is A to Z and 0-9.
The name field length is 12 characters.
To store customized user settings , do the following:
1. From the DSP menu, scroll to STORE.